CNC Machining
Precision CNC milling on the Daewoo DMV-400 — tight-tolerance brackets, fixtures, and machined replacement parts.
Service(1)
Equipment(2)
Haeger 618 MSPE
Precision surface grinding in our Brampton shop — flatness, parallelism, and close-tolerance finishing. Holds flatness to ±0.0005″ on fixtures, tooling components, and any part where the milling tolerance won't quite hit the spec.
Open
Diamond DMV-400
CNC machining and vertical milling in our Brampton shop — precision parts, fixtures, and secondary operations. Mills, drills, taps, bores, and contours to ±0.001″ — the work that's too tight for the laser and too complex for manual machining.
Open
Gallery(22)
CNC Machined Aluminum Fixture
Custom CNC machined aluminum workholding fixture milled from a solid 6061 block on the DMV-400. Multiple precision pockets, dowel-pin registration, and threaded mounting holes for a client's inspection setup on production parts.
Open
CNC Milled Precision Component
Precision CNC machining services for a milled automotive component with reamed dowel-pin bores and tapped mounting holes. ±0.001″ dimensional tolerance verified on first article via CMM, production lot of 50 units shipped to spec.
Open
Counterbored Plates
CNC counterbored mounting plates with flush fastener holes and precision hole patterns. Aluminum and steel plate machining for industrial assemblies that need clean visible surfaces.
Open
Custom Bushings & Bearings
Custom CNC machined bushings and bearings — single-piece bushings, bearing seats, and shaft adapters machined from drawings or worn samples for replacement work.
Open
Prototype Components
Prototype CNC machined components in aluminum 6061 and 1018 steel — production-equivalent metal for design validation before committing to repeat tooling.
Open
Replacement Parts
Custom machined replacement parts reverse-engineered from a sample or drawing for legacy equipment with no factory spare. CNC milling and turning for one-off industrial fabrication.
Open
Threaded Brackets
Laser-cut brackets finished with CNC tapped mounting holes and counterbores in one in-house workflow. Eliminates the second-shop step for production-volume bracket runs.
Open
Tooling Components
CNC machined tooling components for production fixtures and dies — punch retainers and die plates machined from tool steel, ground flat where flatness matters.
Open
Contoured Profiles
CNC contoured profiles — 3-axis milling on solid or sheet stock for custom shapes that don't fit standard sections. Aluminum, steel, and tool-steel materials in low-to-mid volume runs.
Open
Counterbore Patterns
CNC counterbored hole patterns on plate components — flush fastener pockets repeated to drawing for industrial mounting plates and equipment frames.
Open
Custom Milled Parts
Custom CNC milled parts from CAD or sketch — prototype-through-production milling on the DMV-400 for one-off and repeat industrial work.
Open
Pocketed Components
CNC pocketed components with flat-bottomed milled pockets and recesses for assembly clearance, weight reduction, and component nesting.
Open
Reamed-Bore Parts
Reamed-bore parts with precision bores for press-fit hardware and dowel pins. CNC reaming for repeatable assembly registration on production tooling.
Open
Tool Plates & Jigs
CNC machined tool plates and inspection jigs — production tooling, gauging fixtures, and shop-floor setup blocks built to drawing.
Open
Custom Precision Components
Custom precision components requiring tight flatness and parallel specs — surface ground on the Haeger 618 MSPE for tool-and-die and inspection work.
Open
Gauge Plates
Surface ground gauge plates in tool steel — inspection tooling and shop reference plates ground flat for repeatable measurement.
Open
Matched Parallels
Surface ground matched parallels — tool-steel pairs ground to the same height for milling vise setups and inspection workflows.
Open
Mating Plates
Hardware-grade mating plates with parallel ground surfaces. Surface grinding for tooling alignment and assembly registration in production fixtures.
Open
Mold Components
Surface ground mold and die components — mating surfaces flat to spec for stamping, forming, and injection tools.
Open
Precision Fixtures
Precision fixtures with surfaces ground flat — for in-house and client tooling, inspection setups, and repeatable workholding.
Open
Surface Plate Refinishing
Resurfacing of worn precision references and shop tooling surfaces. Surface grinding to restore flatness on inspection plates and machine bedways.
Open
Tool Blocks
Hardened tool steel blocks machined and surface ground for production tooling. Custom tool blocks for stamping, forming, and die work.
Open
Page(1)
Quote a cnc machining project.
Send a CAD file or a hand sketch — same-day quotes, ISO 9001:2015 documented quality on every order.